User's Manual

INSTALLATION AND MAINTENANCE MANUAL
Tsunami FAMILY
SPREAD SPECTRUM RADIOS
SEPTEMBER 1999
PAGE 2-22 SECTION 2: PRODUCT DESCRIPTION
2.5 Installation Accessories
The Tsunami radio is shipped with several accessories commonly required for the radio as described
below:
AC Power
Supply
If ordered as an option, this power supply provides AC to DC conversion for use
with AC powered locations.
AC Power
Cord
This power cord connects the AC Power Supply, if ordered, to a standard 115V
U.S. AC outlet.
Rack Mount
Brackets
Two brackets (along with required mounting screws) are provided which allow 19-
inch rack mounting of the Tsunami radio.
Terminal
Connector
This is a 6-pin mating connector used for DC power supply.
D
Connector
9-pin
Two of these mating connectors are provided. One is used for the DIAGNOSTICS
port interface and another for the AUX DATA port.
D
Connector
25-pin
There are 2 mating connectors provided, one for the ALARM interface and the
other for the VF interface.
RF Power
Adjustment
Cover
A small plastic cap is provided which is placed over the RF output power
adjustment receptacle once output power has been set by professional installation
personnel.
Other accessories are available, such as orderwire handsets, connector adapters and special cables.
These can be ordered separately upon request.