User's Manual

INSTALLATION AND MAINTENANCE MANUAL
Tsunami FAMILY
SPREAD SPECTRUM RADIOS
SEPTEMBER 1999
PAGE 5-2 SECTION 5: APPENDICES
Appendix B - Rear Panel DIP Switches
The Tsunami radio has three separate eight-segment rear panel DIP switches, labeled SW1,
SW2 and SW3. Upon shipment from the factory, these switches are set for factory default
configuration, which is all switches down (in the “zero” position), except for SW3 positions 5
through 8, which are set to match the installed rear panel RF filter assembly (which determines
the frequency channel for transmit and receive, such as A1, A2, B1, B2, etc.). The tables in this
section provide a quick reference for the DIP switch functions and their settings.
DIP switch settings are noted by their position, either up (1), or down (0),
not by on/off as may be printed on the DIP switch assembly.