User's Manual
Table Of Contents
- Preface
- Overview
- Installation and Initialization
- Basic Configuration
- Advanced Configuration
- 4.1 System Configuration
- 4.2 Network Configuration
- 4.3 Ethernet Properties Configuration
- 4.4 Wireless Configuration
- 4.5 Security Configuration
- 4.6 Quality of Service (QoS) Configuration
- 4.7 VLAN Configuration (Bridge Mode only)
- 4.8 Filtering Configuration (Bridge Only)
- 4.9 DHCP Configuration
- 4.10 IGMP Snooping (Bridge Mode only)
- 4.11 Routing Features Configuration
- System Management
- Monitoring the System
- Procedures
- 7.1 TFTP Server Setup
- 7.2 Web Interface Firmware Download
- 7.3 Configuration Backup
- 7.4 Configuration Restore
- 7.5 Text Based Configuration (TBC) File Management
- 7.6 Soft Reset to Factory Default
- 7.7 Hard Reset to Factory Default
- 7.8 Forced Reload
- 7.9 Upgrade a New Firmware Using ScanTool in Bootloader Mode
- 7.10 Download a New Firmware Using CLI from Bootloader
- Troubleshooting
- 8.1 PoE Injector
- 8.2 Connectivity Issues
- 8.3 Communication Issues
- 8.4 Setup and Configuration Issues
- 8.4.1 Lost Password
- 8.4.2 The QB-8100 Responds Slowly
- 8.4.3 Device Has Incorrect IP Address
- 8.4.4 HTTP Interface Does Not Work
- 8.4.5 Telnet CLI Does Not Work
- 8.4.6 TFTP Server Does Not Work
- 8.4.7 Setting IP Address using Serial Port
- 8.4.8 RADIUS Authentication Server
- 8.4.9 TFTP Server
- 8.4.10 Recovery Procedures
- 8.4.11 Soft Reset to Factory Defaults
- 8.4.12 Hard Reset to Factory Defaults
- 8.4.13 Forced Reload
- 8.4.14 VLAN Operation Issues
- 8.4.15 Changes Do Not Take Effect
- 8.4.16 Link Problems
- 8.4.17 General Check
- 8.4.18 Statistics Check
- 8.4.19 Analyzing the Spectrum
- Frequency Domains and Channels
- Boot Loader CLI and ScanTool
- Technical Specifications
- Part Numbers
- Regulatory Approval and Frequency Domains
- Integrated Dual Polarized Panel Antenna Specifications
- Radio and Transmission Specifications
- OFDM Modulation Rates
- Wireless Protocol
- Interfaces
- Transmit Power Settings
- Receive Sensitivity
- Latency
- Latency
- Management
- Power Supply
- LEDs
- Software Features
- Hardware Specifications
- Physical and Environmental Specifications
- MTBF and Warranty
- Lightning Protection
- Statement of Warranty
- Technical Services and Support
Frequency Domains and Channels
Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 200
The following screen displays the list of frequency domains supported by the device.
NOTE: The supported frequency domains differ based on the License file present on the board.
T8000-C1:65:7E# show supported-frequency-domains
RADIO-INDEX 1
SUPPORTED FREQUENCY DOMAINS : 4,9,10,11,13,14,15,16,20,23
********************************************************
Frequency Domains Reference List
********************************************************
1 ---> United States 5GHz
2 ---> United States 5.8GHz
3 ---> United States 2.4GHz
4 ---> World 5GHz
5 ---> World 4.9GHz
6 ---> World 2.4GHz
7 ---> World 2.3GHz
8 ---> World 2.5GHz
9 ---> Canada 5GHz
10 ---> Europe 5.8GHz
11 ---> Europe 5.4GHz
12 ---> Europe 2.4GHz
13 ---> Russia 5GHz
14 ---> Taiwan 5GHz
15 ---> United States 5GHz
16 ---> Canada 5.8GHz
17 ---> World 6.4GHz
20 ---> UK 5.8GHz
21 ---> World 5.9GHz
22 ---> US2 5.3 And 5.8GHz
23 ---> India 5.8GHz
********************************************************