User's Manual

Monitoring the System
Tsunami QB-8100 Series (100 Mbps/5 Mbps Models) Installation and Management Guide 155
Figure 6-4 End Point B Link Statistics
Click Refresh, to get the updated or latest End Point B Link Statistics.
The following table lists the parameters and their descriptions:
Field Description
End Point B Name System name of the End Point B connected.
Mac Address MAC address of the End Point B
connected.
Local Tx Rate (Mbps) End Point A Tx Rate.
Remote Tx Rate (Mbps) End Point B Tx Rate.
Local Antenna Port Info Refers to the status of the local antenna port for the
End Point B. This status is shown by three different
legends:
Local Signal (dBm) Refers to the signal level with which the End Point A
received wireless frames from the End Point B.
Local Noise (dBm) Refers to the noise level with which the End Point A
received wireless frames from the End Point B.
Local SNR (dB) Refers to the SNR measured by the receiver at the near
end and is based on the Local Signal and Local Noise.
This legend is displayed when the antenna
port is disabled.
This legend is displayed when the antenna
port is enabled and signal is present.
This legend is displayed when the antenna
port is enabled and signal is not present.