User's Manual

ORiNOCO Wireless Client User Guide
Chapter 4 Proxim Client Utility Configuration 29
setting of a unique key, which is used with higher forms of encryption such as AES
(Advanced Encryption Standard). You can enable WPA (Wi-Fi Protected Access)
encryption by checking the WPA box and configuring PassPhrase key.
• Dynamic Security/WPA – Refer to the type of security mode the station is using. The
options include:
Ø TLS
Ø PEAP
Ø LEAP (Non-WPA Only, WPA does not apply to LEAP mode)
To define the security mode, select the desired security mode from the drop-down
menu. The selections in the drop-down menu will change if you select the WPA
checkbox.
• Disabled – Use this mode when there is no security authentication or encryption is
currently enabled on your Wireless LAN network.
Figure 4-9 Security Setting on Profile Management Icon