User's Manual

ORiNOCO Wireless Client User Guide
Chapter 2 Installation 16
14. Put the computer cover back into place. Reconnect the cabling and restart your computer.
15. If prompted, follow any on-screen instructions to complete the installation.
16. The Wireless Client should now be successfully installed.
l If you have an Access Point on the network with no security enabled, the Wireless Client
should connect automatically.
l If you have an Access Point on the network with security enabled, double-click the Proxim
icon to launch the Proxim Client Utility; use this utility to create profiles, configure the card,
and enable security.
l If you do not have an Access Point, use the Proxim Client Utility to set the card to
Peer-to-Peer Ad Hoc mode.
ORiNOCO Wireless Clients sold in Europe do not support
Peer-to-Peer Group when in 802.11a mode.
For more information on Peer-to-Peer Groups and Access Point networks, see Chapter 3
Wireless Topologies.