User guide

Advanced Configuration AP-4000MR User Guide
SSID/VLAN/Security
145
Configuring an SSID/VLAN with VLAN Tagging Disabled
With VLAN tagging disabled (from the SSID/VLAN/Security > Mgmt VLAN tab), only one SSID can be configured per
interface. All parameters set on the Wireless-A or Wireless-B tab will be applied to that SSID.
1. Click SSID/VLAN/Security > Wireless-A or Wireless-B.
The SSID, VLAN, and Security Configuration page is displayed.
Figure 4-60 SSID, VLAN, and Security Configuration (VLAN Tagging Disabled)
2. Enable or disable RADIUS accounting on the VLAN/SSID by selecting Enable or Disable from the Accounting
Status drop-down menu.
3. Control the functionality of RADIUS MAC Authentication on the VLAN/SSID by selecting one of the following from the
the RADIUS Authentication Status drop-down menu.
• Enable: MAC addresses in the MAC Access Control List stored on the RADIUS server are blocked or allowed,
based on the MAC ACL settings. If a higher priority authentication protocol is also enabled, the higher-priority
settings will override the MAC ACL settings. See Authentication Protocol Hierarchy.
• Disable: RADIUS MAC ACL settings are disabled.
• Strict: RADIUS MAC ACL settings are enabled. If a higher-priority authentication protocol is also enabled,
RADIUS MAC ACL settings will be applied in addition to the higher priority authentication protocol settings. See
Authentication Protocol Hierarchy.