Installation Guide

Edge

v2 - Hardware Installation Guide 8

Device Overview

This section provides the hardware overview and installation procedure for the following product(s):

• MP-1035-CPE

• MP-1015-BS3

• MP-1025-BS3

• MP-1045-BS3

• MP-1055-BS3

3.1 Edge 10x5 Hardware Overview

Figure 3-1 MP-1035-CPE, MP-10x5-BS3

The features of the above devices are tabulated as below:

A detailed description about the various components of the device are explained in the following sections.

Device Model Description

MP-1035-CPE Edge MP 1035, Customer Premises Equipment, 300 Mbps, integrated antenna (pack of 6)

MP-1015-BS3 Edge MP 1015, Base Station (1 SU) and Subscriber 100 Mbps, integrated antenna and RP-SMA

MP-1025-BS3 Edge MP 1025, Base Station (1 SU) and Subscriber 400 Mbps, integrated antenna and RP-SMA

MP-1045-BS3 Edge MP 1045, Base Station (1 SU) and Subscriber 100 Mbps, integrated antenna and RP-SMA

MP-1055-BS3 Edge MP 1055, Base Station (1 SU) and Subscriber 300 Mbps, integrated antenna and RP-SMA

Item Features Description

1 Ethernet Port • PoE IN and Data

• Debugging and Management

2 Grounding Point • A provision to ground the device.

3 5 GHz Antenna Ports (A1 and A2) • A provision to connect external antenna in MIMO 2x2

mode.

• Connect A1 to antenna Vertical Polarity port and

A2 to antenna Horizontal Polarity port.

Notes: Antenna ports A1 and A2 are not available

for Edge MP-1035-CPE.