Installation Guide

Technical Specifications
Edge
TM
v2 - Hardware Installation Guide 29
Power Supply
Hardware Specifications
Physical Specifications
Products Category Specification
MP-1035-CPE
MP-1015-BS3
MP-1025-BS3
MP-1045-BS3
MP-1055-BS3
Input Voltage Via RJ45 Ethernet interface supplying 36 - 56 V DC on Ethernet Port.
Power consumption: 22 W typical, 25 W max (1015 & 1025)
10 W typical, 12 W max (1035, 1045 & 1055)
PoE Injector Input: 100 – 240 V AC (50/60 Hz)
Output: 56 V DC (30 Watts)
*Pin-out: V+ on pins 3/4/5/6, V- on pins 1/2/7/8
Operating Temp: 0º C to +35º C
* Refer supplied PoE model for actual power Pin-out specification.
Wall Mount PoE Injector
(suitable for 1035, 1045
& 1055 only)
Input: 100 – 240 V AC (50/60 Hz)
Output: 48 V DC (24 Watts)
*Pin-out: V+ on pins 4/5, V- on pins 7/8
Operating Temp: 0º C to +40º C
* Refer supplied PoE model for actual power Pin-out specification.
Products Radio Processor
Speed
Memory Input Power Power Consumption
MP-1035-CPE 5.150 - 5.925 GHz
MIMO radio
720 MHz Flash: 32 MB
RAM: 256 MB
Power-over-Ethernet
36 - 56 V DC
10 W typical, 12 W
max (1035)
MP-1015-BS3
MP-1025-BS3
5.150 - 5.925 GHz
MIMO radio
2.4 GHZ Bluetooth
Low Energy radio
720 MHz Flash: 32 MB
RAM: 256 MB
Power-over-Ethernet
36 - 56 V DC
22 W typical, 25 W
max (1015 & 1025)
MP-1045-BS3
MP-1055-BS3
4.900 - 5.925 GHz
MIMO radio
720 MHz Flash: 32 MB
RAM: 256 MB
Power-over-Ethernet
36 - 56 V DC
10 W typical, 12 W
max (1045 & 1055)
Products Category Specification
MP-1035-CPE
MP-1015-BS3
MP-1025-BS3
MP-1045-BS3
MP-1055-BS3
Dimensions (L x W x H) 170 x 217 x 56 mm / 6.7 x 8.55 x 2.2 in
Weight MP-1015: 1.24 kg / 2.73 lbs
MP-1025: 1.24 kg / 2.73 lbs
MP-1035: 1.19 kg / 2.62 lbs
MP-1045: 1.19 kg / 2.62 lbs
MP-1055: 1.19 kg / 2.62 lbs