User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Networking Configuration
61
3. Select the Priority. This selection sets the lowest level alert to be sent to the Syslog server.
4. Enter a Comment. This field is optional.
5. Enable or disable this Syslog server using the Status drop-down menu.
6. Click OK.
Trap Hosts
Traps are sent to the configured list of Trap Hosts. The following traps are supported:
From the Trap Hosts page, you can configure the Trap Hosts.
Figure 3-18 Trap Host List
1. Do one of the following:
• Click Add to add a new Trap host to the list. You may add up to two servers.
• Click the radio button next to one of the Trap host’s IP addresses and click Clone to make a copy of the Trap host
entry.
Description Severity Additional Information
TFTP request failed 1
TFTP request successful 4
System manually rebooted 1
System cold/warm start 1 BS only
Event log reset 4
Interface up 1 Includes interface number
Interface down 1 Includes interface number
SS link lost 1 BS only
SS modulation dropped to BPSK ½ 2 BS only
Service Flow creation 4
GPS not present Alert (1) BS Only
GPS lock lost Alert (1) BS Only