User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Command Line Interface Tsunami MP.16 3650 System User Guide
Monitoring the BS and SS: Subscriber Station Statistics
163
Subscriber Station Statistics
Log in to the Subscriber Station to view SS Statistics.
SS Bridge Statistics
To view SS bridge statistics, enter the following command:
MP16>show bridgestat
The following statistics will be displayed:
• Bridge port
• Number of frames received
• Number of frames sent
• Number of frames discarded
SS MAC Statistics
To view SS MAC statistics, enter the following command:
MP16>show macstats
The following statistics will be displayed:
• Total packets sent
• Total packets received
• Total HCS errors
• Total CRC errors
• Current temperature
• Average RSSI
• Average RSL
• Average SNR
• Current uplink modulation
• Current downlink modulation
• Elapsed time since entry
SS Ethernet Statistics
To view SS Ethernet statistics, enter the following command:
MP16>show pkstats
The following statistics will be displayed:
• Number of unicast packets transmitted
• Number of unicast packets received
• Number of multicast packets transmitted
• Number of multicast packets received
Per-Service Flow Statistics
To view Service Flow statistics, enter the following command: