User's Manual

Command Line Interface Tsunami MP.16 3650 System User Guide
Configuration from the Base Station: Subscriber Station List
140
Subscriber Station List
All SSs in the Subscriber Station List are authorized to join the network. Depending on the Net Entry mode of the Base
Station, this list is populated as follows:
• Unrestricted mode: SSs are automatically added to the Subscriber Station List upon registering with the network. The
default SS Class configured during SS Authentication is initially assigned to SSs.
• Internal authorization mode: Each SS must be manually added to the Subscriber Station List. An SS class is assigned
manually during this process.
CAUTION: In internal authorization mode, only SSs in the Subscriber Station List are authorized to join the network.
• External authorization mode: SSs are added to the Subscriber Station List automatically by the configured RADIUS
server. The RADIUS server assigns an SS class.
CAUTION: When changing to external authorization from any other authorization type, SSs currently in the SS List
must be manually deleted.
The administrator may optionally configure parameters of individual SSs on the list, including assigning an SS class,
overriding particular elements of an assigned SS Class, and resetting overridden parameters to their default states.
To view the entries in the SS List, enter the following command at the root prompt:
MP16>show ss
To add an SS MAC address to the SS List, use the add command as follows, at the root prompt:
MP16>add ss <SS MAC address>
To assign an SS Class, enter the following:
MP16>configure ss <SS MAC address>
MP16(SS MAC Address)>set ssclass <SS Class Name>
Additionally, you can configure parameters specific to the particular Subscriber Station from the ss configuration prompt.
These values will override the values of the associated SS Class.
For example, assume Subscriber Station 1 (SS1) is set to use SS Class 1 (SSCLASS1), and that SSCLASS1 has a
VLAN mode of “Trunk.” If you want SS1 to use SSCLASS1, but to use a VLAN mode of “Access,” you could override the
VLAN mode of the class by configuring the VLAN mode for SS1 only in the SS table.
If you do not configure any parameters specific to the SS, the SS Class parameters will be applied.
You may also reset the overrides to the original Class parameters.
To view all configurable parameters for the SS, enter the following command at the SS prompt:
MP16(SS MAC Address)>set ?
To view all configured parameters for the SS, enter the following command at the SS prompt:
MP16(SS MAC Address)>show
The following parameters can be configured for the SS:
Name Type Values Access Parameter
MAC Address MAC Address — R macaddr
SS Class DisplayString Alphanumeric RW ssclass