User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Command Line Interface Tsunami MP.16 3650 System User Guide
Configuration from the Base Station: Base Station Parameters
135
where:
• <network> is the IP address of the destination network
• <mask> is the subnet mask of the destination network
• <gateway> is the IP address of the destination gateway
RADIUS Configuration
The following parameters may be viewed or configured:
To configure the RADIUS client on the BS, the IP address, shared secret, and status are required. All other parameters
are optional:
MP16>configure bs
MP16(bs)>set radius ipaddr <IP address> ssecret <password> status <enable/disable>
Name Type Values Access Parameter
Radius Group — R radius
RADIUS Server IP
Address
IP Address IP Address of RADIUS Server RW ipaddr
RADIUS Server
Destination Port Number
Integer 1000-65536 RW port
RADIUS Server Shared
Secret
Display String 1 - 64 characters RW ssecret
RADIUS Server
Response Time
Integer 1 - 10 (seconds) RW responsetm
Maximum
retransmissions to the
Server
Integer 0 - 4 RW maxretx
RADIUS Server Status Integer enable
disable
RW status