User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Monitoring the BS and SS Tsunami MP.16 3650 System User Guide
Subscriber Station Monitoring
122
• Average SNR
• Current uplink and downlink modulations
• Elapsed time since network entry
SS Service Flow Statistics
Figure 7-9 SS Service Flow Statistics
This screen provides information on each Service Flow that has been provisioned (whether active or inactive) to the SS.
Arrows indicate whether the SF is uplink or downlink. The following statistics are displayed for each SF:
• Direction and State: The colored arrows on the page indicate the direction and state of each SF.
• Subscriber Station: The MAC address of the SS using the Service Flow.
• Service Flow Name: The name of the SF.
• SFID: The Service Flow’s ID number
• CID: The connection ID (if connected)
• Pkts: The number of packets sent or received (active flows only).