User's Manual

Table Of Contents
Commands on BS/SS Tsunami MP.16 3650 System User Guide
Save Config to Server (BS Only)
109
Save Config to Server (BS Only)
Save via TFTP
On the BS, use the Save via TFTP page to save configuration to a location external to the unit. A TFTP server must be
running and configured to point to the directory containing the file.
If you do not have a TFTP server installed on your system, install the TFTP server from the Installation CD.
Figure 5-2 Save via TFTP Screen
The Update page contains the following parameters:
File Name: Enter the name of the file to be saved (including the file extension).
TFTP Server IP Address: Enter the IP Address of the TFTP server where the file is to be placed.