User's Manual

Subscriber Station Configuration Tsunami MP.16 3650 System User Guide
System Configuration
102
System Configuration
To access the System Configuration page, click Configuration > System. The System Configuration page allows you to
set and view SS-specific MAC address, name, location, and contact information.
Figure 4-1 SS System Configuration Parameters
The following parameters can be configured or viewed from the System Configuration page:
• System Description: A read-only description of the Subscriber Station, including software version and build
information.
• SS MAC Address: The MAC address of the SS.
• System Name: The name assigned to SS. Enter a value between 1 and 255 alphanumeric characters.
• System Location: The location where the SS is installed. Enter a value between 1 and 255 alphanumeric characters.
• Contact Name: The name of the person responsible for the SS. Enter a value between 1 and 255 alphanumeric
characters.
• Contact Phone: The telephone number of the person responsible for the SS. Enter a value between 1 and 255
alphanumeric characters.
• Contact Email: The email address of the person responsible for the SS. Enter a value between 1 and 255
alphanumeric characters.