User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Base Station Configuration Tsunami MP.16 3650 System User Guide
Service Class Creation
95
Configuring an SS Class for Access Mode
With the VLAN mode set to Access, the following screen will be displayed:
Figure 3-52 SS Class Creation Step 3: Networking Parameters (Access Mode)
In Access mode, only one VLAN ID may be specified as having access to the SS. This VLAN ID has management
access.
NOTE: When you move the VLAN ID to the Selected Access VLAN ID list, the VLAN Management ID field will be
automatically populated with this ID.
Set the following parameters and then click Save & Finish:
• Selected VLAN Access ID: Select one VLAN ID from the Available VLAN ID List to serve as the Management ID.
Only VLAN packets tagged with this ID will have access to and be able to manage the SS. To designate a VLAN ID as
the Management ID, select the VLAN ID from Available VLAN ID List, and click the right arrow . To designate a
different VLAN ID as the Management ID, remove the current VLAN ID by clicking the left arrow, and select a different
VLAN ID from the list.
• VLAN Priority: Priority to be given to the Selected Access VLAN ID; select a number between 0 and 7.
For information on configuring the Available VLAN ID List, see VLAN ID List.