User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Service Class Creation
88
Service Flow Creation
You can create, delete, and edit up to 256 service flow classes, including those that are predefined for you (see
Pre-Defined Service Flow Classes).
1. Click Service Class Creation > SF Class
Figure 3-44 Service Flow Class List
2. Do one of the following:
• Click Add to create a new SF Class.
• Click the radio button next to one of the SF Classes and click Clone to make a copy of that SF Class.
• Click the radio button next to one of the SF Classes and click Edit an existing SF Class.
• Click the radio button next to one of the SF Classes and click Delete to delete that SF Class from the list.
3. If you are adding or cloning an SF Class, specify a unique name between 1 and 32 characters, and click Add.
PPPoE Data Ethertype (type 1, 0x8864)
IP Ethertype (type 1, 0x800)
ARP Ethertype (type 1, 0x806)
Expedited Forwarding IP TOS/DSCP (low=0x2D, high=0x2D, mask = 0x3F)
Streaming Video (IP/TV) IP TOS/DSCP (low=0x0D, high=0x0D, mask = 0x3F)
802.1p BE Ethernet Priority (low=0, high=0)
802.1p Voice Ethernet Priority (low=6, high=6)
802.1p Video Ethernet Priority (low=5, high=5)
L2 Broadcast/Multicast Ethernet Destination (dest = 0x80000000, mask = 0x80000000)
Table 3-3 Pre-Defined PIRs
PIR Name Classification Fields