User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Service Class Creation
86
Figure 3-42 Add Packet Identification Rules Screen
The Configuration screen for the PIR will be displayed.
4. Place a check mark in the box next a classifier name to configure it and add it to the PIR. Uncheck the box to remove
the classifier from the PIR. In the following figure, the IP TOS and VLAN ID classifiers are selected and expanded for
configuration.
NOTE: If you are editing or cloning a PIR, some classifiers will already be expanded and configured; you may modify
these classifiers as needed or uncheck the box to remove them from the PIR.
Figure 3-43 PIR Classifier List
5. If packets matching the classifiers configured below are to be blocked, select the PIR Blocked box. If this box is not
checked, packets matching the classifiers configured below will be allowed.
6. Configure the desired classifiers as follows.