User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Subscriber Station List
75
Subscriber Station List Configuration
NOTE: You must reboot the SS for any configuration changes to take effect.
1. Do one of the following:
• Click Add to add an authorized SS to the list.
• Click the radio button next to one of the SS MAC addresses and click Clone to make a copy of SS entry.
• Click the radio button next to one of the SS MAC addresses and click Edit to edit an existing SS entry.
• Click the radio button next to one of the SS MAC addresses and click Delete to delete that SS from the list.
2. If you are adding or cloning an SS entry, specify the MAC address of the new SS and click Add. If you are editing an
SS entry, you will not be prompted to specify a MAC address.
Figure 3-34 Adding a Subscriber Station
The Subscriber Station page will be displayed.
Figure 3-35 Subscriber Station Configuration
3. Select an SS Class. The drop-down menu displays the currently assigned SS Class. Use the drop-down menu to
select a different SS Class. If a desired class of service is not contained in this list, you may create it (see Service
Class Creation) and then return to the Subscriber Station List page to assign it to one or more SSs.