User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Base Station Configuration Tsunami MP.16 3650 System User Guide
Subscriber Station List
74
Subscriber Station List
From the Subscriber Station List page, you can add SSs to your network, associate them with an SS Class, and
configure select SS-specific parameters.
Figure 3-33 Subscriber Station List
All SSs in the Subscriber Station List are authorized to join the network. Depending on the Net Entry mode of the Base
Station, this list is populated as follows:
• Unrestricted mode: SSs are automatically added to the Subscriber Station List upon registering with the network. The
default SS Class configured on the Subscriber Station Authentication page is initially assigned to SSs.
• Internal authorization mode: Each SS must be manually added to the Subscriber Station List. An SS class is assigned
manually during this process.
CAUTION: In internal authorization mode, only SSs in the Subscriber Station List are authorized to join the network.
• External authorization mode: SSs are added to the Subscriber Station List automatically by the configured RADIUS
server. The RADIUS server assigns an SS class.
CAUTION: When changing to external authorization from any other authorization type, SSs currently in the SS List
must be manually deleted.
The administrator may optionally configure parameters of individual SSs on the list, including assigning an SS class,
overriding particular elements of an assigned SS Class, and resetting overridden parameters to their default states.