User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Base Station Configuration Tsunami MP.16 3650 System User Guide
Global Positioning System (GPS)
71
Figure 3-30 Secondary Management TFTP Configuration
3. Enter the Software Version number of the image to be used with the selected hardware.
4. Enter the IP address of the TFTP Server from which the specified software image is available for download.
5. Enter the Upgrade File Name of the software image to be downloaded.
6. Click OK.
DHCP Server
Use the DHCP Server page to configure and enable the BS to function as a DHCP server when secondary management
is enabled on the SS.
Figure 3-31
1. Enter the following information:
• Base Station Secondary Management IP: The IP address of the BS to be used when functioning as a DHCP
server.
• Base Station Secondary Management Mask: The mask of the BS to be used when functioning as a DHCP
server.