User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Global Positioning System (GPS)
67
When GPS is enabled on the Base Station, and the GPS recevier is either not connected or is still searching for satellites,
the Base Station will show “not found’:
Figure 3-25 BSU GPS “not found” mode
When the GPS has acquired the satellite signals, but the Base Station has not yet synchronized its internal timing, the
Base Station will show “not locked”:
Figure 3-26 BSU GPS “not locked” mode
When the GPS receiver has processed the GPS timing signal and the Base Station is properly synchronized, the base
Station will show “locked”: