User's Manual

Base Station Configuration Tsunami MP.16 3650 System User Guide
Networking Configuration
62
• Click the radio button next to one of the Trap host’s IP addresses and click Edit to edit an existing Trap host entry.
• Click the radio button next to one of the Trap host’s IP addresses and click Delete to delete that Trap host from the
list.
2. If you are adding or cloning a Trap host entry, specify the IP address of the new host and click Add. If you are editing
an Trap host entry, you will not be prompted to specify an IP address.
NOTE: When adding a host, you must enter an IP address. Do not enter a name.
Figure 3-19 Adding a Trap Host
The Trap Host Configuration page will be displayed.
Figure 3-20 Subscriber Station Configuration
3. Set the Password for the Trap host.
4. Enter a Comment. This field is optional.
5. Enable or disable this Trap host using the Status drop-down menu.