User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Installation and Initialization Tsunami MP.16 3650 System User Guide
Installing Latest Software
39
Installing Latest Software
Proxim periodically releases updated software for the Tsunami MP.16 3650 system on its support Web site,
http://support.proxim.com. Proxim recommends that you check the Web site for the latest updates after you have
installed and initialized the unit.
Download Software
1. Contact Technical Services and Support to obtain the newest software.
2. Store the downloaded software in your TFTP server’s directory.
3. Install the software via TFTP using the Web interface or the Command Line Interface, as described below.
Install Software from your TFTP Server using the Web Interface
1. Log in to the BS or SS
2. Click Commands > Update to BS or Update to SS > via TFTP
The Update Via TFTP page is displayed, as shown below.
Figure 2-6 Update via TFTP Screen
3. From the File Type drop-down menu, select Image.
4. Enter the name of the downloaded software file (including the file extension) in the TFTP File Name field. This file
must be in the TFTP server’s local root directory.
5. Enter the IP address of your TFTP server in the TFTP Server IP Addr field.
6. Click OK.
The download will begin, and image will be downloaded to the unit
7. Click Configuration > Commands > Reboot.
8. Click Reboot.
Install Software from your TFTP Server using the CLI
1. Open the CLI interface to the BS or SS via Telnet or a serial connection.
2. Enter your username and password when prompted.