User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Command Line Interface Tsunami MP.16 3650 System User Guide
Configuration from the Base Station: VLAN ID List
139
VLAN ID List
All VLAN IDs to be used by the BS and associated SSs must be stored in the VLAN ID List. Up to 256 individual VLAN
IDs may be stored in this list.
NOTE: See VLANs in the Base Station Configuration chapter for an overview of VLAN functionality in the MP.16 system.
Use the add and delete commands from the root prompt to add entries to or remove entries from the VLAN ID List
table:
MP16>add vlantbl <VLAN ID>
where <vlanid> is the ID of the VLAN you wish to add.
To view all VLAN IDs in the table:
MP16>show vlantbl
To delete entries in the vlan table,
MP16>delete vlantbl <vlanid> (deletes a particular VLAN)
MP16>delete vlantbl all (deletes all vlans)
Name Type Values Access Parameter
VLAN ID List Table N/A R vlantbl
VLAN ID Integer 1 – 4095 RW vlanid