User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Command Line Interface Tsunami MP.16 3650 System User Guide
CLI Overview: Commands
128
Delete Command
Use the delete command to delete configured PIRs, SF Classes, SS Classes, authorized SSs, and VLAN IDs.
Valid syntax for the delete command is as follows:
Download Command
The download command has different effects on the BS and the SS:
• On the SS: the download command is used to download an image from a specified TFTP server.
• On the BS, the download command is used to download an image file or a configuration file from a specified TFTP
server.
To transfer a file from the TFTP server to the unit:
download <TFTP Server IP Address> <path or filename> <file type>
where:
• <TFTP IP Address> is the IP address of the configured TFTP server
• <path or filename> is the filename or path and filename of file to be downloaded
configure log Access logging parameters (Base Station only).
configure mac Access Base Station MAC parameters (Base Station only).
configure pir <PIR name> Access Packet Identification Rule parameters (Base Station only).
configure radio Access Base Station radio parameters (Base Station only).
configure sfclass <Service
Flow Class Name>
Access Service Flow parameters (Base Station only).
configure ss <MAC Address> On the BS, access parameters for an authorized Subscriber Station.
On the SS, configure local SS parameters.
configure ssclass
<Subscriber Station Class
Name>
Access Subscriber Station class parameters (Base Station only).
configure syslog Enable or disable Syslog functionality (Base Station only).
configure sysloghost <IP
Address)
Configure the parameters of the specified Syslog server (Base Station only).
configure system Access configuration parameters related to the MP.16 system (Base Station
only).
configure tftpconf
<hardware ID>
Configure the Secondary Management TFTP parameters of the specified
hardware ID (Base Station only).
configure traphost <IP
Address>
Configure the parameters of the specified Trap host (Base Station only).
Command Results
delete pir <PIR name> Deletes a Packet Identification Rules (PIR)
delete sfclass <SF Class name> Deletes a Service Flow Class
delete ss <SS MAC address> Deletes an authorized Subscriber Station
delete ssclass <SS Class name> Deletes a Subscriber Station Class
delete sysloghost <IP Address) Configure the parameters of the specified Syslog server.
delete tftpconf <hardware ID> Delete a configured hardware ID for Secondary Management.
delete vlantbl <VLAN ID> Deletes a VLAN ID from the VLAN ID List
Command Result