User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Technical Specifications Tsunami MP.16 3650 System User Guide
Hardware Specifications: Environmental Specifications
168
Hardware Specifications
Environmental Specifications
Power Specifications
Size and Weight Specifications
Integrated Antenna (SS only)
Feature Specification
Outdoor Radio Unit (BS/SS) Indoor Power Injector
Operating Temperature -40° to +60° C 0° to +40° C
Storage Temperature -55° to +85° C -20° to +85° C
Operating Altitude Up to 15,000 ft. Up to 15,000 ft.
Water Tightness IPx5 protection in accordance with IEC
60529 and UL50
IPx5 protection in accordance with IEC
60529 and UL50
Storage and Transit Altitude Up to 40,000 ft. Up to 40,000 ft.
Wind Up to 115 mph NA
Humidity Up to 100% Up to 95%, non-condensing
Dust IPx6 protection in accordance with IEC
60529
NA
Salt Immune NA
Transit and Vibration Per MIL-STD-810, methods 514.5 and
516
NA
Feature Specification
Outdoor Radio Unit (BS/SS) Indoor Power Injector
Input Voltage Range 42 to 60 VDC 90 to 260 VAC, 47 to 63 Hz
Output Voltage and Current NA 48 VDC up to 0.67 AMPs
Input Connector RJ45 3-conductor male
Power Consumption (Typical) BS: Less than 12 Watts
SS: Less than 10 Watts
Up to 32 Watts total power output
Feature Specification
Outdoor Radio Unit (BS/SS) Indoor Power Injector
Weight 5.3 lbs 2.7 lbs
Dimensions (Packaged) 14.57 x 13.70 x 8.19 in
(370 x 348 x 208 mm)
5.12 x 3.62 x 2.64 in
(130 x 92 x 67 mm)
Dimensions (Unpackaged: Model 3650 SS/BS) 10.5 x 10.5 x 3.25 in
(267 x 267 x 83 mm)
Dimensions (Unpackaged: Model 3650i SS) 12.6 x 12.6 x 3.5 in
(320 x 320 x 89 mm)
Feature Specification
Gain 18 dBi
Polarization Horizontal or vertical
Horizontal Beamwidth 18°