User's Manual

Log Messages on the BS/SS Tsunami MP.16 3650 System User Guide
Log Messages
115
Log Messages
Log messages for both the Base Station and Subscriber Stations can be monitored by the administrator. You can view log
messages for either the non-volatile or the volatile memory.
Figure 6-2 Non-Volatile Message Log Page
Common Log Messages
The following log messages are supported on both the Subscriber Station and the Base Station:
Base Station Log Messages
The following log messages are supported in the Base Station:
Subscriber Station Log Messages
The following log messages are supported at the Subscriber Station:
Log Message Severity
Invalid HTTP Login Warning
Invalid SNMP Community Warning
Invalid CLI Login Warning
Log Message Severity
Subscriber station xx:xx:xx:xx:xx:xx successfully entered the network Informational
Subscriber station xx:xx:xx:xx:xx:xx authorization failure Warning
Subscriber station xx:xx:xx:xx:xx:xx exited the network Informational
Subscriber station xx:xx:xx:xx:xx:xx adapted uplink/downlink from y to z. (e.g., y,z = BPSK-1/2) Informational
No response from Radius Server Alert
Service Flow xxxx successfully activated Informational
Subscriber station xx:xx:xx:xx:xx:xx power adjusted by # dB Informational
Log Message Severity
Subscriber station adjusted power by # dB Informational
Service Flow xxxx successfully activated Informational
Subscriber station lost link to BSID xx:xx:xx:xx:xx:xx Alert
Subscriber station successfully connected to BSID xx:xx:xx:xx:xx:xx Informational
Subscriber station requesting downlink adaptation from y to z Informational