User's Manual
Table Of Contents
- Introduction
- Installation and Initialization
- Hardware Description
- System Requirements
- Product Package
- Hardware Installation
- Step 1: Choose a Location
- Step 2: Unpack Shipping Box
- Step 3: Assemble the Cable
- Step 4: Determine Proper Mounting Orientation
- Step 5: Assemble Mounting Hardware
- Step 6: Mount the Unit
- Step 7: Plug in the Cables
- Step 8: Power on the Unit
- Step 9: View LEDs
- Step 10: Align the Antenna
- Step 11: Tighten the Cables
- Step 12: Weatherproof the Connectors
- Step 13: Install Documentation and Software
- Using the Web Interface
- Installing Latest Software
- First Configuration
- Base Station Configuration
- Introduction
- System Configuration
- MAC Configuration
- Radio Configuration
- Radio Downlink Burst Profile Configuration
- Radio Uplink Burst Profile Configuration
- Networking Configuration
- Global Positioning System (GPS)
- Subscriber Station Authentication
- Subscriber Station List
- Service Class Creation
- Logging Configuration
- Management Interface Configuration
- Subscriber Station Configuration
- Commands on BS/SS
- Log Messages on the BS/SS
- Monitoring the BS and SS
- Technical Specifications
- Command Line Interface
- CLI Overview
- Configuration from the Base Station
- Configuration from the Subscriber Station
- Monitoring the BS and SS
- Technical Services and Support
- Statement of Warranty
Subscriber Station Configuration Tsunami MP.16 3650 System User Guide
Network Configuration
104
Network Configuration
From the SS Network configuration page, you can set the Ethernet IP address and mask, specify the default gateway,
and enable/disable secondary management functionality.
Figure 4-3 SS Network Configuration
The following parameters may be set or viewed:
• Ethernet IP Address: Enter an IP address and subnet for the unit’s Ethernet port. The default IP address of the SS is
192.168.10.2.
• Ethernet IP Subnet Mask: Select a subnet mask for the unit’s Ethernet port. The default mask is 255.255.255.0
• Default Gateway: Enter an IP address to serve as the default IP gateway.
• Secondary Management: Use the drop-down menu to enable or disable secondary management support. See Global
Positioning System (GPS) in the Base Station Configuration chapter for more information.