User Manual

Configuration MP.11-R Installation and Management
Interface Parameters
86
• Registration Timeout: This is the registration process time-out of an SU on a BSU. Default is 5 seconds.
• Rx Activity Timeout: This is the activity time-out of an SU on a BSU. Default is 0 seconds.
• Network Secret: A network secret is a secret password given to all nodes of a network. An SU can only register to a
BSU if it has the same Network Secret. The Network Secret is sent encrypted and can be used as a security option.
• Input / Output Bandwidth Limit: These parameters limit the data traffic received on the wireless interface and
transmitted to the wireless interface, respectively. Selections are in steps of 64 Kbps from 64 Kbps to 108,064 Kbps.
Ethernet
To set the Ethernet speed, duplex mode, and input and output bandwidth limits, click Configure > Interfaces > Ethernet.
You can set the desired speed and transmission mode by clicking on Configuration. The recommended setting is
auto-speed-auto-duplex, but you may select from these settings for the type of Ethernet transmission:
• Half-duplex means that only one side can transmit at a time.
• Full-duplex lets both sides transmit.
• Auto-duplex selects the best transmission mode available when both sides are set to auto-select.
Medium -86 dBm -62 dBm
Small -78 dBm -52 dBm
Mini -70 dBm -42 dBm
Micro -62 dBm -36 dBm