User's Manual Part 2

Commands MeshMAX 5054 Series User Guide
Command Function for Mesh and Access Point Module
215
Figure 8-2 Update AP via TFTP Command Screen
If you do not have a TFTP server installed on your system, install the TFTP server from the installation CD. You can either
install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD’s Xtras/SolarWinds
sub-directory.
The Update AP via TFTP tab shows version information and allows you to enter TFTP information as described below.
• Server IP Address: Enter the TFTP server IP Address.
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
NOTE: This is the IP address that will be used to point the Access Point to the AP Image file.
• File Name: Enter the name of the file to be downloaded (including the file extension).
– Copy the file to the TFTP server’s root folder.
• File Type: Select the proper file type. Choices include:
– Config: configuration information, such as System Name, Contact Name, and so on.
NOTE: The AP will reboot automatically when downloading a Config file.
– Image: AP Image (executable program).
– Upgrade BspBl: Bootloader software.
– SSL Certificate: the digital certificate for authentication in SSL communications.
– SSL Private Key: the private key for encryption in SSL communications.
– SSH Public Key: the public key in SSH communications.
– SSH Private Key: the private key in SSH communications.
– CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by the
AP immediately after being uploaded.
– License File
• File Operation: Select either Update AP or Update AP & Reboot. You should reboot the AP after downloading files.