User's Manual Part 2

Commands MeshMAX 5054 Series User Guide
Command Functions for Subscriber Module
211
The following parameters may be configured or viewed:
• Server IP address: Enter the TFTP Server IP address.
• File Name: Enter the name of the file to be downloaded. If you are using the SolarWinds TFTP server software
located on your product installation CD, the default directory for downloading files is C:\TFTP-Root.
• File Type: Choose either Config, image, BspBl, or license.
• File Operation: Choose either Download or Download and Reboot.
Click OK to start the download.
Upload
Click Commands > Upload to upload a configuration or log file from the unit to a TFTP server.
The following parameters may be configured or viewed:
• Server IP address: Enter the TFTP Server IP address.
• File Name: Enter the name of the file to be uploaded. If you are using the SolarWinds TFTP server software located
on your product installation CD, the default directory for uploading files is C:\TFTP-Root.
• File Type: Choose either Config or Eventlog.
Click OK to start the upload.
Reboot
Click Commands > Reboot to reboot the embedded software of the Subscriber unit. Configuration changes are saved
and the unit is reset.