User's Manual Part 2

Specifications for Mesh and Access Point Module MeshMAX 5054 Series User Guide
339
* DFS is required for 802.11a APs certified in the ETSI, TELEC, FCC, and IC regulatory domains and operating in the middle frequency band.
When ACS is disabled, available channels are limited to those in the lower frequency band.
Security Functions
* Key lengths supported by 802.11a/4.9 GHz: 64-bit, 128-bit, and 152-bit.
Key lengths supported by 802.11b: 64-bit and 128-bit.
Key lengths supported by 802.11b/g: 64-bit, 128-bit, and 152-bit.
† EAP-MD5, EAP-TLS, EAP-TTLS, and PEAP client supplicant supported.
‡ Support is provided for a primary and backup RADIUS authentication server for both MAC-based authentication and 802.1x authentication per
VLAN.
§ Use in conjunction with WPA or 802.1x Authentication.
Broadcast Unique Beacon 3
Super Mode Support 3
Feature Supported by Mesh and Access
Point Module
Security Profiles per VLAN 3
RADIUS Profiles per VLAN 3
IEEE 802.11 WEP* 3
MAC Access Control 3
RADIUS MAC-based Access Control 3
IEEE 802.1x Authentication
†
3
Multiple Authentication Server Support per VLAN
‡
3
Rogue Scanning to Detect Rogue Access Points and
Clients
3
Per User Per Session (PUPS) Encryption
§
3
Wi-Fi Protected Access (WPA)/802.11i (WPA2) 3
Hardware Configuration Reset Disable 3