User's Manual Part 2

Technical Specifications MeshMAX 5054 Series User Guide
Receive Sensitivity
332
Mesh and Wi-Fi Features
Remote Monitoring • Telnet CLI
• HTTP
•TFTP
• SNMPv1, SNMPv2
• MIB-II, Proxim MIBs, Bridge MIB, RIPv2 MIB, Etherlike MIB
Category Specification
Authentication • 802.1X support including PEAP, EAP-TLs, EAP-TTLS, EAP-SIM, and other EAP
methods that conform to RFC 3748 to yield mutual authentication and dynamic per-user,
per-session encryption keys
• RADIUS-based MAC address authentication
• Dynamic MAC address conrol list, automatically updated without rebooting AP
Encryption • 802.11i support for CCMP/AES keys of 128 bits (WPA2)
• TKIP encryption
• WEP keys of 64 and 128 bits
• AES encryption
Message Authentication • 802.11i AES message authenitication with 128 bits keys
• TKIP with 128 bit Michael Message Integrity Check
Intrusion Detection • Rogue AP and client detection
• Detect switch port of rogue access point when used in conjuction with ProximVision
TM
802.11 MAC Level
Functionality
• Multiple SSID and BSSID
• Auto Channel Selection
• Dynamic Frequency Selection (DFS)
• 802.1d support
• Transmit power control
• Qo support for mesh backhaul and access
• Closed system
• Channel Blacklist
• Turbo mode
• Super mode
Bridging and Filtering • IEEE 802.1d Bridging
• VLAN Support
• WDS Relay
• Protocol Filtering
• Modified Proxy ARP Support
• Multicast/Broadcast Storm Filtering
• TCP/UDP Port Filtering
• Intra-BSS Clients blocking
• Packet Forwarding
• VPN filtering
Category Specification