User's Manual Part 2

Configuration MeshMAX 5054 Series User Guide
Advanced Configuration of Mesh and Access Point Module
159
• Notify All (Notify both AP and Client detection)
8. Configure the Scan Results Trap Report Style to control the way detected stations are reported in the notification:
• Report all detected stations since last scan (default)
• Report all detected stations since start of scan
9. Configure the second wireless interface, if required.
10.Click OK.
The results of the Rogue Scan can be viewed in the Status page in the HTTP interface.
Figure 6-38 Rogue Scan Screen
Bridge
The AP is a bridge between your wired and wireless networking devices. As a bridge, the functions performed by the AP
include:
• MAC address learning
• Forward and filtering decision making
• Spanning Tree protocol used for loop avoidance