User's Manual Part 1

Configuration MeshMAX 5054 Series User Guide
Configuring the Subscriber Module
97
Edit/Delete Entries in the NAT Static Mapping Table
1. Click the Edit/Delete Table Entries button.
2. Enter your changes. To delete an entry, click the Status drop-down box and select Delete. Then Click OK.
Supported Session Protocols
The NAT feature supports the following session protocols for both inbound and outbound access with the required
support, applications, and limitations given in the following table.
Certain Internet applications require an Application Level Gateway (ALG) to provide the required transparency for an
application running on a host in a private network to connect to its counterpart running on a host in the public network. An
ALG may interact with NAT to set up state information, use NAT state information, modify application specific payload and
perform the tasks necessary to get the application running across address realms.
No more than one server of a particular type is supported within the private network behind the SU.
These VPN protocols are supported with their corresponding ALGs: IPsec, PPTP, L2TP.
The following session protocols are supported:
Protocol Support Applications Limitations
ICMP ICMP ALG Ping
FTP FTP ALG File transfer
H.323 H.323 ALG Multimedia conferencing
HTTP Port mapping for inbound
connection.
Web browser
TFTP Port mapping for inbound
connection.
File transfer
Telnet Port mapping for inbound
connection.
Remote login
CUSeeMe Port mapping for inbound and
outbound connection.
Video conferencing One user is allowed for video
conferencing
IMAP Port mapping for inbound
connection.
Mail
PNM Port mapping for inbound
connection.
Streaming media with
Real Player
POP3 Port mapping for inbound
connection.
E-mail
SMTP Port mapping for inbound
connection.
E-mail Mails with IP addresses of MTAs or
using IP addresses in place of FQDN
are not supported (requires SMTP
ALG).