Manualshelf

User's Manual Part 1

ManualsBrandsProxim Wireless ManualsElectronics802.11 a/b/g Access Point
81828384858687888990
Configuration MeshMAX 5054 Series User Guide
Configuring the Subscriber Module
83
For all password fields, the passwords must be between 6 and 32 characters. Changes take effect immediately after you
click OK.
• SNMP Read Community Password: The password for read access to the Subscriber unit using SNMP. Enter a
password in both the Password field and the Confirm field. The default password is public.
• SNMP Read/Write Community Password: The password for read and write access to the Subscriber unit using
SNMP. Enter a password in both the Password field and the Confirm field. The default password is public.
• Telnet (CLI) Password: The password for the CLI interface. Enter a password in both the Password field and the
Confirm field. The default password is public.
• HTTP (Web) Password: The password for the Web browser HTTP interface. Enter a password in both the Password
field and the Confirm field. The default password is public.
Services
The Services tab lets you configure the SNMP, Telnet, HTTP, and Serial interface parameters. Changes to these
parameters require a reboot to take effect.