User's Manual Part 1

63
MeshMAX 5054 Series User Guide
6
Configuration
This section describes configuring the MeshMAX 5054 settings using the unit’s web interface. The following topics are
discussed in this chapter:
Configuring the Subscriber Module
• System Parameters
– Bridge and Routing Modes
• Network Parameters
– IP Configuration
– Roaming
– DHCP Server
– Spanning Tree (Bridge Mode Only)
– IP Routes (Routing Mode only)
– DHCP Relay Agent (Routing Mode Only)
• Interface Parameters
– Wireless
– Ethernet
• SNMP Parameters
– Trap Host Table
• Management Parameters
– Passwords
– Services
• Security Parameters
– MAC Authentication (BSU Only)
– Encryption
• Filtering Parameters
– Overview
– Ethernet Protocol
– Static MAC Address Filtering
– Storm Threshold
– Broadcast Protocol Filtering
– IP Access Table Filtering
• RIP Parameters (Routing Mode Only)
– RIP Example
– RIP Notes
• NAT (Routing Mode Only)
– NAT Static Port Mapping Table
– Supported Session Protocols
Advanced Configuration of Mesh and Access Point Module
• System Parameters