User's Manual Part 1

System Status MeshMAX 5054 Series User Guide
Subscriber Module
61
Figure 5-1 System Status Screen of Subscriber Module
System Status
The basic system status is shown in this section, including the version number of the embedded software.
Systems Traps
The status of system traps is shown in this section. System traps occur when the Subscriber unit encounters
irregularities. Deleting system traps has no effect on the operation of the Subscriber unit. System traps also are sent to an
SNMP manager station (if so configured).
Event Log
Click the Status button and the Event Log tab to view the contents of your Event Log. The Event Log keeps track of
events that occur during the operation of the Subscriber unit. The Event Log displays messages that may not be
captured by System Traps, such as the Transmit Power for the Frequency Channel selected.