User's Manual Part 1

60
MeshMAX 5054 Series User Guide
5
System Status
This section describes viewing system status and event log information from the unit’s Web Interface.
• Subscriber Module
– Status
– Event Log
• Mesh and Access Point Module
Subscriber Module
Click on the Status button to access system and event log information. See the following sections:
• Status
• Event Log
Help and Exit buttons also appear on each page of the Web interface; click the Help button to access online help; click
the Exit button to exit the application.
For an introduction to the basics of management, see Basic Management of Subscriber Module.
Status
The Status tab showing the system status is displayed automatically when you log into the Web Interface. It also is the
default window displayed when you click the Status button on the left side of the window.
The Status tab shows the System Status and the System Traps.