User's Manual Part 1

Installation and Initialization MeshMAX 5054 Series User Guide

Set aad enable local

Enables display of the local SNR (the SNR as measured by the receiver at the far end).

Set aad enable remote

Enables display of the remote SNR (the SNR as measured by the receiver at the far end).

Set aad enable average

Enables display of the remote SNR (the average of local and remote SNR).

Set aad disable

Disables Antenna Alignment Display (Ctrl-C also disables AAD).

Step 12: Install Documentation and Software

To install the documentation and software on a computer or network:

1. Place the installation CD in a CD-ROM drive. The installer normally starts automatically. (If the installation program

does not start automatically, click setup.exe on the installation CD).

2. Follow the instructions displayed on the installer windows.