Manualshelf

User's Manual Part 1

ManualsBrandsProxim Wireless ManualsElectronics802.11 a/b/g Access Point
21222324252627282930
Installation and Initialization MeshMAX 5054 Series User Guide
24
The following figure shows the full assembly attached to the unit
Step 5: Mount the Unit
IMPORTANT! If the unit is going to be used as part of a Mesh network, you will need to perform initial
configuration of the parameters mentioned in the Prerequisites section of this MeshMAX 5054 User
Guide before you mount the unit. See the User Guide for more information on configuring these
parameters.
CAUTION: To ensure that water does not gather around the antenna connectors, mount the unit with the antenna
connectors facing downward.
1. To pole-mount, insert the provided screws through bracket F. Fasten around the pole to bracket E and secure
(Torque 11 N.m/100 in-lbs).