User's Manual Part 1

MeshMAX 5054 Series User Guide
18
2
Installation and Initialization
This chapter describes the steps required to install and mount the MeshMAX 5054 unit, including installing, mounting,
and aligning the antenna. The installation procedure does not include the mounting and connection of antennas. See the
MeshMAX 5054 Series Antenna Installation Guide for this information.
If you are already familiar with this type of product, you can use the Quick Install Guide for streamlined installation
procedures.
See the following sections:
• Hardware Overview
• Package Contents
• Installation Procedure
– Step 1: Choose a Location
– Step 2: Unpack the Shipping Box
– Step 3: Assemble the Cable
– Step 4: Assemble Mounting Hardware
– Step 5: Mount the Unit
– Step 6: Plug in the Cables
– Step 7: Power on the Unit
– Step 8: View LEDs
– Step 9: Tighten the Cables
– Step 10: Weatherproof the Connectors
– Step 11: Align the Antenna
– Step 12: Install Documentation and Software
• Reboot and Reset Functionality for MeshMAX
– Reboot and Reset Functionality for Mesh and Access Point Module
– Reboot and Reset Functionality for Subscriber Module
• Unit Initialization
– Using ScanTool
– Scan Tool Instructions
• Mesh Initialization
– Logging In
– Using the Setup Wizard
– Software Updates
• Subscriber Initialization
– Setting the IP Address