User's Manual Part 1

Configuration MeshMAX 5054 Series User Guide
Advanced Configuration of Mesh and Access Point Module
109
– Year: Enter the current year.
– Month: Enter the month in digits (1-12).
– Day: Enter the day in digits (1-31).
– Hour: Enter the hour in digits (0-23).
– Minutes: Enter the minutes in digits (0-59).
– Seconds: Enter the seconds in digits (0-59).
Interfaces
From the Interfaces tab, you configure the Access Point’s operational mode settings, power control settings, wireless
interface settings and Ethernet settings. You may also configure a Wireless Distribution System for AP-to-AP
communications. The Interfaces tab contains the following sub-tabs:
• Operational Mode
• Wireless-A (802.11a or 4.9 GHz Radio) and Wireless-B (802.11b/g Radio)
• Ethernet
• Mesh
NOTE: On APs with model numbers ending in -WD, the operating country must be selected on the System tab before
any of these sub-tabs are available.
Operational Mode
From this tab, you can configure and view the operational mode for the Wireless-A (802.11a radio or 4.9 GHz radio) or
Wireless-B (802.11b/g radio) interface.