User's Manual Part 1

Configuration MeshMAX 5054 Series User Guide
Advanced Configuration of Mesh and Access Point Module
100
• GPS Longitude: The longitude at which the AP is installed. Enter the value in the format required by your network
management system. If using the ProximVision™ Network Management System (recommended), enter the value in
decimals (e.g., 78.4523).
• GPS Latitude: The latitude at which the AP is installed. Enter the value in the format required by your network
management system. If using the ProximVision™ Network Management System (recommended), enter the value in
decimals (e.g., 78.4523).
• GPS Altitude: The altitude at which the AP is installed. Enter the value in the format required by your network
management system. If using the ProximVision™ Network Management System (recommended), enter the value in
decimals (e.g., 78.4523).
• Contact Name: The name of the person responsible for the AP.
• Contact Email: The email address of the person responsible for the AP.
• Contact Phone: The telephone number of the person responsible for the AP.
• Object ID: This is a read-only field that displays the Access Point’s system object identification number; this
information is useful if you are managing the AP using SNMP.
• Ethernet MAC Address: This is a read-only field that displays the unique MAC (Media Access Control) address for
the Access Point’s Ethernet interface. The MAC address is assigned at the factory.
• Descriptor: This is a read-only field that reports the Access Point’s name, serial number, current image software
version, and current bootloader software version.
• Up Time: This is a read-only field that displays how long the Access Point has been running since its last reboot.
Figure 6-2 System Tab
Dynamic DNS Support
DNS is a distributed database mapping the user readable names and IP addresses (and more) of every registered
system on the Internet. Dynamic DNS is a lightweight mechanism which allows for modification of the DNS data of host