User's Manual

Step 12: Install Documentation and Software

To install the documentation and software on a computer or network:

Place the installation CD in a CD-ROM drive. The installer normally starts 1.

automatically. (If the installation program does not start automatically, click

setup.exe on the installation CD).

Follow the instructions displayed on the installer windows. 2.

Step 5: Mount the Unit

Caution:

To ensure that water does not gather around the antenna

connectors, mount the unit with the antenna connectors facing

downward.

To pole-mount, insert the provided screws through bracket F. Fasten around 1.

the pole to bracket E and secure (Torque 11 N

m/100 in-lbs).

To wall-mount the unit, mount bracket (E) to the wall using 4 screws (not 2.

provided), as shown.

IMPORTANT!

If the unit is going to be used as part of a Mesh network, you will need to

perform initial conﬁ guration of the parameters mentioned in the Pre-

requisites section of this MeshMAX 5054 User Guide before you mount

the unit. See the User Guide for more information on conﬁ guring these

parameters.