User's Manual

Safety Information (USA, Canada, & European Union) Safety and Regulatory Information
3
Safety Information (USA, Canada, & European Union)
This product has been evaluated to, and comply with IEC60950-1:2001, the Standard for the Safety of Information
Technology Equipment.
When using this device, basic safety precautions should always be followed to reduce the risk of fire, electrical shock,
and injury to persons, including the following:
The product is intended to be installed, used, and maintained by experienced telecommunications personnel only.
WARNING: These units are intended for installation in accordance with Articles 110 –18, 110-26, and 110-27, 725,
800, and 810 of the United States National Electric Code ANSINFPA 70, and per the applicable
Articles in the Canadian National Electric Code.
• Operate and install these products as described in this manual. Equipment must be installed and used in strict
accordance with the manufacturer's instructions as described in the user documentation provided.
• Installation of these products must conform to local regulations and codes.
• Products are to be used with and powered by only the power injector provided.
• A 15-amp circuit breaker is required at the power source.
• Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier and distributor.
WARNING: This equipment is intended to be grounded. A 10 AWG earthing conductor at a minimum is to be
used for this purpose.
• Do not connect or disconnect the power cable to the equipment when the power injector is plugged into an AC power
outlet.
• Servicing of these products should be performed only by trained personnel. Do not disassemble. By opening or
removing any covers, you may expose yourself to hazardous energy parts. Incorrect reassembly of these products
can cause a malfunction and/or electric shock when the units are subsequently used. No user serviceable parts; all
repairs and service must be handled by a qualified service center.
• Do not insert any objects of any shape or size inside these products while powered on. Object may contact
hazardous energy parts that could result in a risk of fire or personal injury.
• Do not remove or alter the Marking label provided on these products.
• To avoid the risk of electric shock from lightning, do not use these products during an electrical storm.
• When using these products with an external antenna, see the installation documentation provided with the antenna.
• These products have been evaluated for outdoor use.
• No user serviceable parts; all repairs and service must be handled by a qualified service center.