Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 263
`
When working in a high interference network, ensure to run the spectrum analyzer with multiple iterations
(increase the Scan Time) to get accurate results.
7. The scanned results are displayed in the form of a graph as follows:
:
`
A minor variation in Spectrum Analyzer results can be expected due to the following reasons:
`
Satellite Density Configuration
`
A variation in the radio properties between various device models.
Figure 7-46 An Example - Scanned Results
:
• When the Spectrum Analyzer starts, the wireless link, if established, is terminated and re-established
after the scan is completed.
• As the wireless link is down during spectrum analysis, the remote device cannot be accessed. Hence, if
Spectrum Analyzer is started on a remote device, the results will not be available until spectrum scan is
completed and wireless link gets re-established.