Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 255
7.10.3.2 Hide Temperature Log
To hide the temperature log messages, click Hide Temp Log.
7.10.3.3 Clear Temperature Log
To clear the temperature log messages, click Clear Temp Log. The messages are cleared and moved to the backup file leaving
the temperature log file empty. An event is generated on clearing the temperature log messages.
: The current and the backed up temperature logs are stored in the flash memory and can be retrieved even after device
reboot.
7.11 Tools
7.11.1 Wireless Site Survey
: Applicable only to a device in SU or End Point B mode.
Wireless Site Survey is done by the SU or End Point B only. This feature scans all the available channels according to the
current Channel Bandwidth, and collects information about all BSUs or Endpoint A configured with the same network name
as SUs or End Point B.
Figure 7-38 Wireless Site Survey - SU Mode
To initialize the survey process, click Start. This process list the details of all the available BSUs or End Point A. To stop the site
survey process, click Stop.
During the scan process, click Refresh to view the latest discovered BSU/End Point A.
: Site Survey cannot be performed, when Roaming is enabled.